Back
MAP Thermoplastic hoses
Characteristics
The references MAP are high pressure flexible hoses made of a polyester eslastomer tube, reinforced with a braid of polyaramid yarn, a polyester interlay, a single braid of carbon steel wire and an outer polyurethane cover.
Minimum burst pressure: 2.800 kg/cm2 / 40.000 psi
MAPS-1,5 flexible hose is made of an inner polyethylene tube (POM ), with four spiral steel wire braids and a polyamide cover.
Minimum burst pressure: 4.400 kg/cm2 / 63.800 psi
As an option, the 1,5 m hoses are supplied with a quick coupler included.
Technical sheet
Metric
| Reference | Working pressure (kg/cm2) | Nominal bore (Ø mm) | Lenght (m) | Connection thread | Quick coupler (Ref) |
|---|---|---|---|---|---|
| MAP-1,5 | 700 | 6.4 | 1.5 | 3/8 x 18 NPT | ---- |
| MAP-2 | 2 | ---- | |||
| MAP-3 | 3 | ---- | |||
| MAP-6 | 6 | ---- | |||
| MCE-3 | 9.8 | 3 | ---- | ||
| MCE-6 | 6 | ---- | |||
| A-5555 | 6.4 | 1.5 | A-5507-M | ||
| A-5588 | A-5506-M | ||||
| MAPS-1,5 | 1760 | 5 | 1/4 x 19 GAS | ---- | |
| A-5559 | A-5537-H |